Не запускается Catalyst Control Center

[Srg Clock]

Опять же решил выделить в отдельную тему.

После многократной переустановки AMD/ATI драйверов Catalyst Control Center перестал запускатся. На 15 сек. появляются часики (колечко) в Таск Манагере видно запуск ccc.exe и mom.exe затем всё тихо исчезает.

Два монитора работают нормально, но CCC надо чтобы включать третий монитор - lcd телик вместо второго монитора для удобного просмотра русских фильмов. Раньше вся эта фигня работал как часы.

Попробовал всё снести и переустановить - та же фуйня.

Параметры компьютера и видяхи:
SapphireHD5770 -1G-GDDR5-PCIE-DUAL-DVI-I-HDMI-DP

Processor AMD Phenom(tm) II X4 955 Processor, 3200 Mhz, 4 Core(s), 4 Logical Processor(s)
Mainboard ASUS M4A78LT-M
16Гб оперативки.
BIOS Version/Date American Megatrends Inc. 0802, 8/24/2010
VGA driver 11-3_vista64_win7_64_dd_ccc_ocl

Виндовс 7 Хоме Эдишен 64 бит, сервис пак 1.

[Лось]

Fresh Windows Install

[смешно]

как я помню у тебя дедикейтид АТI, disable on-board графику через BIOS.

Посмотри в BIOS какие там вообще есть settings для графики, PCI-Express.

ты не помнишь с каким ATI драйвером (версия) у тебя всё работало?

[Srg Clock]

Карта на борту авто отключается когда ставишь внешнюю карту. Когда буду решать эту проблему попробую снять внешнюю карту вообще. Особых настроек в БИОС для PCI-E пока не замечал.
Фреш виндоус инстолл пока подожду делать.

[Srg Clock]

Сам себе подготовил (щас распечатаю) список чего делать и какими прогами чистить из всяких форумов. Займусь починкой на выходных.

1. Check the driver for video card
http://www.sevenforums.com/graphic-c...nt-open-3.html

2. Get driver from folder
http://www.sevenforums.com/graphic-c...nt-open-4.html

3. DriverSweeper
http://www.guru3d.com/category/driversweeper/

other:
Driver Cleaner Pro


4. Clean GAC
My solution was to clear out the Windows GAC (Global Assembly Cache). In Windows 7, you can browse directly to "C:\Windows\assembly". Sort by "Public Key Token", then delete everything with the Token "90ba9c70f846762e" (ATI's key). You'll obviously need Administrator privileges. No reboot needed either. Reinstalled CCC and it ran perfectly!

The GAC lets you share DLL's that are the same version number. If it's in the GAC, any installer will NOT install a new DLL - it'll use the one in the GAC. If the GAC DLL is corrupted, you're majorly SOL.

When I reinstalled the CCC, it took longer to install then it had before. Presumably, this was due to the installer copying all the correct DLL's to my hard drive. And no ATI DLL's have made it back into my GAC.

To give credit to the original poster, here's the page I found this fix on:

1. Check that (Program Files folder )/ATI Technologies/ATI.ACE is empty
2. Check (Windows folder)/Assembly folder to see if there's any files with Public Key Token of "90ba9c70f846762e" (Sort by Public key token to get a easier view). All these tokens should be uninstalled by right clicking and uninstalling.
3. Check that (Document and Settings)/(User)/AppData/Local/ATI/ACE is empty
4. Reinstall CCC
http://www.hardwareheaven.com/mobili...ol-center.html

5. I next, Downloaded/Installed/Opened Ccleaner from ... http://www.piriform.com/ccleaner/u [...] 111&l=1033 ... (for now, it's version 2.29)
http://download.cnet.com/ccleaner/

6. download a free utility called "Revo Uninstaller" - уже есть

It seems as though this is a universal problem after updating Catalyst Control Center and probably is not related to the drivers download itself. Try the following steps to return CCC to its normal status as this is what worked for me after the 8.10 update and incurring the same problem as you now report:

1) Uninstall CCC as well as updated ATI drivers. Do not use Windows control panel to do this, instead download a free utility called "Revo Uninstaller" (Google it - it's free) and use it to uninstall the 2 aforementioned programs, and set the tool to it's highest setting as this also displays registry settings and related files remaining after the normal sloppy uninstall, that you will then be able to completely uninstall with this tool.

2) Do not reinstall CCC and drivers yet, as you next must go to your C:\ drive and look for any ATI folders that are probably remaining in this location. You do not have to delete them at this time but simply rename them, such as "ATI**_Old". Actually, you will have to go into the TaskManager first and STOP 2 services that are probably running: "MOM.exe" and "CCC.exe" before you will get permission to rename the folder(s).

3) Next, proceed to the "C:\Program Files" directory and again look for possibly 2 or more folders in this directory (folder) that are prefixed with the name "ATI***" (*** stands for a wildcard placeholder in the text). Again, do not delete them as yet, but simply rename them by adding the suffix "_Old" to the folder name. (You can delete them if you like after CCC regains its normal functionality.)

4) Lastly, now reinstall Catalyst Control Center and your required drivers and you will now see new ATI folders in the locations that we just reviewed. When completed try restarting CCC and it should open properly now. You may have to reboot your computer for the actions to take effect.

5) The problem does not appear to be a "driver issue" at all but is more related to the lack of a proper uninstall procedure (ATI should step in and write a good uninstalling application that deletes these retained BUT conflicting folders that are simply confusing the execution of CCC. As you can see by the spinning of the hourglass icon in windows at startup, CCC is trying to start and indeed it's 2 services, MON.exe and CCC.exe do in fact appear as running processes in takmanager, but with competing and conflicting folder information the "CCC GUI" won't open because the shortcut points to multiple versions of the file at the same time, so NO choice (execution) is the result. Remember, computers are Dumb, and only a little smarter than people!

6) I hope this solves your problem!!! :@) d316

7. 2) Download and install Microsoft Windows Installer Cleanup Utility(http://download.microsoft.com/downlo...bd/msicuu2.exe)

[Srg Clock]

Короче только сегодня дошли руки.
В общем надо чистить GAC потом переустанавливать. Поудалять байду с Token "90ba9c70f846762e" (ATI's key) можно только в Safe Mode. Для этого по включении компа после БИОС перед вендой давим F8. Надо успеть - задача не простая.
Чистим гак, перегружаем, деинсталлируем перегружаем, инсталлируем перегружаем - работает!
П.С. Прикола ради написал в оба суппорта - дибилы не знают и те и те. Советуют просто переустановить, а это не помогает.